Klubersynth GH 6-80 Gear

Description

Klubersynth GH 6-80 Gear and High-Temperature Oil (5L)

Klubersynth GH 6-80
Synthetic gear and high-temperature oils with KlüberComp Lube Technology.

Description
Klübersynth GH 6 is a series of gear oils based on polyglycol. They are characterized by high load-carrying capacity against scuffing and resistance to micropitting. Good wear protection of rolling bearings is also confirmed by FAG FE8 test bench results. Klübersynth GH 6 oils are especially resistant to aging and oxidation. They demonstrate good viscosity-temperature properties and excellent performance at high temperatures.

Benefits for you:

• Complies with DIN 51517-3 for CLP-class oils. Gearboxes meeting these standards can be switched to Klübersynth GH 6 oils without additional approvals when general equipment operating instructions are followed.

• KlüberComp Lube Technology ensures quality raw material selection, personalized consulting, and service for achieving highest lubrication performance of various gearbox components.

• From ISO VG 220 viscosity upwards, the scuffing load capacity reaches API GL-5 level, reliably protecting gearboxes against scuffing even under high peak loads.

• Micropitting resistance index GFT ≥ 10 according to FVA 54 standards ensures reliable protection of heavily loaded and micropitting-prone gearboxes.

• Good wear protection of rolling bearings prevents premature failure.

• High resistance to aging and oxidation significantly extends service life compared to mineral oils, enabling longer maintenance intervals and, under certain conditions, lifetime lubrication of equipment.

• Wide temperature range allows using a single viscosity grade for both low and high temperatures in many cases.

• Optimal friction properties of polyglycol-based oils minimize power losses due to wear and increase lubricating efficiency.

• Excellent viscosity-temperature characteristics ensure a reliable lubricating film even at elevated and high temperatures.

• Seals made of materials 72 MBR 902 (except ISO VG 22), 75 FKM 585, and 75 FKM 170055 are resistant to Klübersynth GH 6 oils, preventing leaks and contamination.

• Approved by many gearbox manufacturers including Siemens (Flender), Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, Boston Gear, Baldor, and others.